Ready built in black anodised brass. The sign plate is painted white, and when dry gently rubbed on a piece of paper to remove paint from the raised black letters. The post is then mounted in a drill chuck and spun slowly to apply the white banding, and the red plastic triangle/circle is then pushed into the top to complete the sign.
|
|
|||
|
RT1 No Through Road RT2 Road Junction T RT3 Road Junction (Right) RT4 Road Junction (Left) RT5 Cross Roads RT6 Steep Hill |
RT7 School RT8 Round About RT9 Hospital RT10 Bend (Right) RT11 Bend (Left) RT12 Road Narrows |
RT13 Narrow Bridge RT14 Crossing No Gates RT15 Level Crossing RT16 Low Bridge RT17 Low Bridge Try Load Gauge |
RT18 Double Bend (Right) RT19 Double Bend (Left) RT20 Hump Bridge RT21 Halt At Major Road Ahead RT22 Slow Major Road Ahead |
|
|
|
GPO 1935 Telephone Box (Ready Built or Kit).
The body is
formed from a folded and soldered brass fret, with base and top moulded in
resin (left unsealed in ready built versions, to allow fitting of lights,
people etc). A full interior detailing pack is supplied including backboard,
telephone, mirror and printed material and telephone signs. Kit form not
recommended for modellers without experience of folding brass fret kits as it
can be easily distorted.
SG1303 GPO 1935 Telephone Box (flat pack kit, needs folding and soldering)
SG1304 GPO 1935 Telephone Box (ready built & painted)
SG1307 GPO 1930 GR Post Box (ready built & painted includes waterslide transfers)
SG1305 AA Box Kit in cast resin
These plastic letters are ideal for making up station and signal box name boards and other similar signs. Available in two sizes.
SLG101 Station Name Board Lettering, 13.5mm (2 sprues)
SLG102 Station Name Board Lettering, 7mm (1 sprue)
PB002C Above Seat Scenes for Corridor Stock 99x44mm
PB002NC Above Seat Scenes for Non-Corridor Stock 99x44mm