New improved version. Fits DG280, DG281 and other freelance locomotive bodies. Forms an inside steel frame lazer cut chassis, with coupling and connecting rods, brass spacers, and Buhler motor/gearbox. This improved version comes with nickel silver crossheads, slide bars and motion brackets. Cylinders and brake blocks are cast in resin to eliminate shorting problems. Sandboxes are cast in whitemetal. Includes Slater’s 37.5mm diameter wheels with stainless steel tyres and squared axles. Complete with full instructions. Length 262mm, Width 98mm.
G125 0-6-0 Outside Cylinder Chassis Kit
G126 0-6-0 Inside Cylinder Chassis Kit
L&B 2-6-2 Outside Frame Chassis Kit
Forms an outside steel framed chassis, with brass spacers, resin cylinders, and brass and nickel silver valve gear. Includes Slater’s stainless steel 44mm diameter driving wheels with extended axles and cranks, a pre-assembled brass gearbox with Buhler motor, two pony trucks with steel wheels, and a pair of authentic brass L&B cowcatchers. 45mm gauge version also includes a pickup set. Complete with full instructions. Overall Length 360mm, Overall Width 104mm.
G127 L&B 2-6-2 O/F Chassis Kit 45mm Gauge
G128 L&B 2-6-2 O/F Chassis Kit 32mm Gauge
C&M 0-6-2 Outside Frame Chassis Kit
Forms an outside steel framed chassis, with brass spacers, resin cylinders, and brass and nickel silver valve gear. Includes Slater’s stainless steel 44mm diameter driving wheels with extended axles and cranks, a pre-assembled brass gearbox with Buhler motor, and a pony truck with steel wheels. 45mm gauge version also includes a pickup set. Complete with full instructions. Overall Length 317mm, Overall Width 110mm.
G123 C&M 0-6-2 O/F Chassis Kit 45mm Gauge
G124 C&M 0-6-2 O/F Chassis Kit 32mm Gauge
Dual Gauge 45/32mm 0-4-0 Brass Chassis Kit
This outside crank brass chassis with 6-8 volt Mabuchi Motor, is suitable for GRS Diesel bodies and other small prototypes. Suitable for battery operation. Simple screw assembly. Overall Length 172mm, Overall Width 64mm.
G101 0-4-0 Dual Gauge Brass Chassis Kit
Dual Gauge 45/32mm Rod Driven Chassis (Assembled)
Each chassis is driven by a 12v motor, has non-insulated wheels, outside rods and cranks, crown wheel and pinion. Suitable for battery operation. Overall Width 90mm, 0-4-0 Length 193mm, 0-6-0 Length 258mm.
G129 0-4-0 Dual Gauge Rod Drive Chassis
G130 0-6-0 Dual Gauge Rod Drive Chassis
This Motor / Gearbox combination is as used in the electric version of our G64 Pannier Tank. The unit consists of a Bühler 7 pole motor with flywheel and brass double reduction 1:33 gearbox with bronze gears, steel worm, all polished. Length 92mm, Width 30mm, Height 55mm.
PDG100 Electric Motor & Gearbox, for 6mm axle, 1:33 ratio
PDG101 Electric Motor & Gearbox, for 1/4” axle, 1:33 ratio
PDG104 Electric Motor & Gearbox, for 1/4” axle, Single Reduction, 1:33 ratio
Now with an improved spec, this compact controller is designed for mounting inside the locomotive and suitable for use with our brass chassis. Features speed control and direction switch.
CG102 Battery Controller
GRS Locomotive and Rolling Stock Lining Service
GRS offers a lining service for your Live Steam or Electric Locomotives. The lining can be single, double or triple and is carried out using a bow pen and enamel paints. As an example of cost for this service, a 3-colour lining (simplified) for the Campbeltown and Machrihanish or Leek and Manifold locomotive would be about £75.00. The finished product is painted to a very fine standard and adds an impressive look to your locomotive. Full details are available upon application.