Freelance Industrial Locomotive Kits
A range of British Outline Steam Locomotives based on the Lehman Toy Train chassis. Wheels are hard chrome plated with plunger type pick-ups and skates for good electrical conductivity.
Hunslet Type 0-4-0 Saddle Tank
This 0-4-0 model represents a typical saddle tank with closed cab from this manufacturer which was produced for both railway and industrial companies. Specifications as above.
DG235 Hunslet Body Kit
This 0-4-0 model differs from the closed cab version by the use of a totally open driving position. Specifications otherwise the same.
DG237 Quarry Hunslet Body Kit
This 0-4-0 model represents a typical saddle tank with closed cab from the Peckett Locomotive Company, which were produced for both railway and industrial companies. Specifications as above.
DG236 Peckett 0-4-0 Body Kit
A typical 0-4-2 saddle tank used in many industrial railways. Manufactured in plastic with a considerable number of whitemetal castings including full cab backhead detail. The pony truck is built from a brass etch with bearings and wheelset. An easy to construct kit.
DG238 Kerr Stuart Body Kit
Barclay 0-4-0 Tank Locomotive Body Kit
This 0-4-0 model represents a typical saddle tank with closed cab from Andrew Barclay produced for both railway and industrial companies.
DG287 0-4-0 Saddle Tank Body Kit
Based on the Wisbech & Upwell prototype, this model has a two-piece resin body and can be powered by a range of chassis for 45mm or 32mm gauges. The kit includes brass etch window frames and lamp irons, whitemetal castings for interior and roof detail, and LGB couplings. For 45mm gauge the kit is normally supplied with a USA Trains NW2 chassis. Length 330mm, Width 114mm, Height 151mm
CMD250 Freelance Steam Tram Loco (c/w chassis)
CMD251 Freelance Steam Tram Loco (body only)
SB103 LNER Y6 Tram Loco transfer sheet
DM253 Cowcatcher (pair)
CMD252 Bufferbeam (pair)
PDG2220 Sprung Buffer